Monthly Archives: July 2017

Painting Business – 13 Point Checklist of Essential Tools Most Needed to Start a Painting Business

If you are considering starting a commercial or residential painting business you will only need some basic low-cost tools to start with. You can buy other tools as more jobs come along and with your down payments. Here is a list of the most essential painting business tools needed to get you started.

1.) Quality Cage Frame – Also known as a paint roller. Wooster and Purdy both have strong, commercial-use cage frames sold at most professional paint stores.

2.) Extension Pole – Get yourself a good medium-size fiberglass extension pole for rolling out walls and ceilings.

3.) Wall-Sander – I always sand walls and ceilings before I roll them out. It cleans up cobwebs and anything else that needs to be knocked down to make the walls and ceilings smooth.

4.) Roller Bucket – I use Wooster’s roller bucket. It is tall, square and has a lid. It is made out of durable plastic and balances a lot better than a paint tray and washes out easy. It’s a must have.

5.) Cut-in Bucket – I like to put some paint in a small plastic bucket for cutting in. There are small 1-gallon buckets of drywall compound that when empty make a great cut-bucket plus they have a lid. They will last for years.

6.) Step Ladder – A regular wooden 5-foot step ladder works perfect for most homes. If I need a 6-foot ladder I have an aluminum one for that. Most of the time all I need is my 5-footer and I am only 5’6″ so there you go.

7.) 16′ Extension Ladder – Great for stairwells or ranch-style exterior jobs. I use my 16-foot extension ladder more than any other size. I also have 20′ and a 24′ extension ladders, but i couldn’t get by without my little 16-footer.8.) Drop Cloths – I like using the runner type the most. They are inexpensive, light to carry and can be moved around the room easily. I also have 9 x 12’s on hand.

9.) Fluorescent Light – Interior painting without a fluorescent light is nearly impossible, especially on a cloudy day. Fluorescent light is a nice white light that is great for painting and shows up the colors in their true form.

10.) Tool Bucket – An empty 5-gallon bucket makes a great tool bucket. I keep my pliers, a hammer, razor-blade knives, a caulk gun, etc., in my tool bucket.

11.) Small Fan – I bought a $30 blower type fan made by Stanley Tools from Walmart. It dries out walls and ceilings quickly so you can get back to work cutting in and moving around the room without it being wet.

12.) Drywall compound – I hate Spackle. It flashes under paint jobs. I use the Sheetrock brand of 90-minute quick-dry drywall compound found at Lowes or other hardware stores for around $11 a bag. It will last me all year long. It is the powder formula and is easy to mix up right on the job with water and a small cut bucket. This way you don’t have to carry a heavy 5-gallon pale around with you that can also freeze during the wintertime and can get lots of chunks in it over time.

13.) Caulk Gun – I use painters caulk all the time to fill small gaps between woodwork, trim and walls. Most paint stores have it on hand. I use the 35-year interior/exterior type.

So there you have it. If you are considering starting your own painting business and want to know how much it will cost to get started this list will help you. I would guess off hand that everything on the list totals around $300. If you already have a step ladder and even a small extension ladder, this will cut the start up cost down considerably.

Source by Lee Cusano

Painting – Some Technical Aspects

Painters must be aware of all the intricacies of painting but for the novices, we bring a snapshot of certain technical aspects of painting which will help them out in developing this art.

Media

This refers to the medium used in paintings. It is the color type which is applied on the canvas. The choice of media depends on the solubility, viscosity and miscibility of the fabric or base used. Some examples of painting media include oil paints, pastel paints, spray colors, water colors, enamel paint and wax paint.

Styles

Styles of painting vary from person to person. It depends upon the comfort and interest of the painter. It may also include the use of brushes and paints. In fact, every painter is famous for a particular style of art. Some common forms of painting styles are:

Western: folk, graffiti, body painting, abstract figurative, Oriental and primitive.

Eastern: ink and wash, Persian miniature, madhubani, samikshavad and mughal.

Modern forms

Paints are a thing of past. Now, almost each and everything is used in painting. Be it paper pieces, sand, dust, cement, wood or any other material, they are widely being used in giving texture and extra look to the paintings.

Digitization has also brought various software in the market like Adobe Photo shop, corel draw, image maker and many other which can insert any design, shade or style which you can ever imagine of.

Recent time applications

Gone are the days when painting was done on canvas through brush and paints, exhibited, sold and over. Now it finds its applications in a host of other fields also. The basics and studies of painting are being used in interior designing for decorating houses. Painting provides an insight onto various color combination s and contrasts which enables interior designers to make heaven out of homes.

Another application of painting is in fashion designing where designers create aesthetic and graceful dresses of beautiful color combination s. Here also, the fundamentals of painting come handy in deciding which color or shade suits best on a particular complexion and figure.

A final word

Painting is a universe in itself and you will get more engrossed in it if you will delve deep into it. There are treasures to be found in this area but it requires patience and long years of hard and sincere work. It can be opted both as a hobby and as a profession. The difference lies in the commitment and pursuit.

Source by Tushar Mangl

Benefits of Hiring A Painting Contractor

Color provides the state of mind and aura of a certain place. It has the power to make or break an area and should never ever be disregarded. Employing an expert painting contractor can assist you in having trendy shades for your house that you have not even imagined having. They have the ingenuity and knowledge you transform your property transform to a middle ages charming artwork or an elegant looking spot. Your home need not look unprofessional.

Your home is not just an area for sleeping. It is an area to discover calmness and what better way than to tap the services of a specialist painter that can transform your home into what you envision it to be. In the past, paint that has been used is only water-based. The choices have been really minimal. Yet, as a result of advancements, one has the option of paint innovation. Brighter, better choices can now improve any area where it is applied.

Altering the Personality of a Room and Breathing New Life to It

By painting your residence, you can make it look new. It additionally brings a better feeling and a rejuvenating personality to your space, bringing life and glimmer to any room. Impress your family members, buddies as well as guests. For individuals that intend to make their room unique, they have actually textured paints as a choice. The fantastic thing about these shades is that they can be customized to match your chosen color scheme.

Repainting options are numerous. You can pick from catalogues and see how you want your home to be like. A color specialist would certainly help you balance the appearance. If you want to update the design, you can also work with an interior designer to aid in putting furniture in order and balancing out the view of the room.

A Painting Contractor Helps You Save Time and Money

There are negatives that can happen when you choose to repaint your home by yourself. You could wind up investing more in repairing blunders and defects. By hiring a painting contractor you can be helped by good painters who could make certain that every area will look spotless.

Painting your very own property may look simple. However, you would need to be an expert to figure out the appropriate shade, mix as well as texture. You would definitely not want a space which looking cheap just because you painted it on your own. The time you invest on painting the house alone is so valuable to throw away. Work with a painting contractor instead to complete the task for you.

Source by Fidelio Orosco

How to Prepare Your Palette for Oil Painting

In oil painting palette has two meanings. The first refers to the surface on which your paint is mixed; the second meaning is the array of colors employed for painting.

Most artists prefer a wood palette. Some use a thick piece of glass placed atop a sheet of gray paper. But a glass palette is restricted to studio use and working from a taboret, which is a small table that holds the bulk of your painting gear.

My preference is for the wood palette. Wood palettes come in a variety of shapes and sizes; the most popular is the oval shape that is designed to fit in the crook of your elbow and is gripped with your thumb through the hole in the palette. The wood palette can be either a small, dinner-plate size or a large platter. As a teacher I recommend that beginners use the smaller size palette.

Before the palette can be used for painting it needs to be prepared with a sealant. Unsealed palettes will leach the delicate oils from your paint and rob them of their lustre.

There are three different methods for preparing a palette for painting. One can lightly apply a few coats of shellac letting each coat dry thoroughly before the next. Some artists who have invested in an expensive, counter-weighted palette will painstakingly seal it with a French polish giving it the look of a fine antique. There is, however, a serious drawback to these two preparations: the warm, umber hues of varnish make it difficult to accurately gauge color mixing.

The better method is this: invest in a litre of linseed oil. It needn’t be artist grade. Raw linseed oil that is available in hardware stores suffices well.

Pour a couple of tablespoons of linseed oil onto your palette and with a clean cloth rag evenly spread the oil over your palette. Let the oil sink in for about an hour then repeat six to eight times. To keep your palette from warping it is not a bad idea to work both sides evenly.

The goal is to saturate the wood with oil. Once fully saturated set your palette aside and allow it to air dry for several days. Even after a week, however, your palette will still feel oily. This is a good sign. It means your palette is ready to begin its journey.

Even though your palette is now fully laden with oil it will still leach the delicate emollients from your paint. But only for a little while.

At the conclusion of every painting day you should clean your palette. NEVER, EVER use turpentine to mop up your paints. Turpentine is a solvent and it will strip your palette like a thief run amok in a foreclosed housing development.

Instead scrape your paint off with a painting knife and rub the remainder into your palette with a cloth. In a short time a soft, wax-like surface will develop that will literally love your oil paint. This waxy surface also acquires a neutral gray color that enables you to accurately mix and gauge your color’s hue, tone and temperature.

Your painting palette is an indispensable tool and like your brushes should be well taken care of.

Source by Michael R Britton

Painting With Innate Passion: All Artist’s Are Born, Not Made

Painting is a form of expression which involves the use of paint brushes to create an image on a canvass. An artist has the option of choosing which paints to use; the most popular though are watercolors and oil paints.

It is impossible for an artist to produce a masterpiece without feeling passionate about his work. It is important that the painter is able to clearly visualize what he wishes to express through his painting, and then be able to bring forth his imaginations with accuracy and vivacity. The ability to express oneself in such a way does not involve skill, but talent. One may argue that art can be learned through practice. However, the truth is that individuals, who do not possess an innate talent of drawing and painting, cannot become exceptional artists no matter how hard they try to learn this medium of expression.

The primary talent of a born artist is the ability to imagine. If one evaluates a number of young children on their imagination skills, it will be quite obvious that while some of them have very vivid and creative imaginations, others lack the originality and the panache that a naturally creative individual has. If one were to reevaluate the children after training the less creative kids to be more imaginative; even after a complete and rigorous training the results will prove that training cannot enable less imaginative kids to compete with those who are gifted.

Being able to visualize creative scenarios is just half the job of an artist. The crucial task is to be able to express what one sees with their mind’s eye on paper. This requires the ability to make the right strokes and use the right colors to create a visually appealing painting. Mixing colors with precision so as to get the right shades is also part of an artist’s skill set. Additionally, an artist needs to be able to keep in mind the aspect of perspective. Perspective is the skill of being able to give the right impression of a three-dimensional object on a two-dimensional surface, such that the height, width, depth, and position are proportionate in relation to each other. These are some of the basic skills of a talented artist, which one may attempt to learn, but will never master unless he has a natural flair and aptitude for painting.

It may seem rather unfair to say that all artists are born, not made. It is not that a person cannot become an artist if he doesn’t have a natural tendency towards art and painting; but the fact is that one cannot produce masterpieces and become a famous painter just by enrolling themselves at an art school. There has to be significant innate talent in order to make a name from painting.

Source by Shelly Morrison

They Who Paint in the Sun Should Not Be Painting!

He who paints in the sun will not get the professional results they are expecting. Paint whether oil or latex, thinned out or not dries or cures from air temperature, slower in the shade and faster in the sun.

The solvents or driers such as ASA (anti skinning agent), cobalt, naptha, mineral spirits, xylene, found in oil based paint evaporate at a much quicker rate when directly exposed to the sun. Whether spraying, brushing, or rolling paint sets up much like frying a egg in a pan when painting in direct sun light. This “setup time” will not allow the applicator to properly spread out or level the paint on the surface. The end result whether on wood, metal, or siding is going to be rough in appearance.

Before painting the exterior of any structure the painter must scope out the direction of the sun and its relation to the structure at different times of the day. He or she must work away from the sun!

This is most important when working on the roof painting, the sides of dormers, etc. The heat generated to roofing materials most notably shingles can reach temperatures well over 100 degrees.

Painting in these extremes is self defeating in that the paint sets up too quickly to properly apply it. In turn making the outcome of the paint job look unprofessional.

The painters tools react differently under different temperatures and don’t achieve the same results when painting in the hot sun. Brushes cake up, rollers dry out, and spray tips clog faster. The pot life of the paint curdles faster which is detrimental. To obtain the best results of exterior painting is to Paint in the Shade!

Source by Dan Rowe

What Exactly Do Industrial Painting Contractors Do?

Industrial painting contractors use a variety of methods to coat surfaces with paint. Unlike home decorators there are many more ways to lay down a layer of paint than just by applying it by brush or roller. In addition, the surfaces in industrial painting tend to require a lot more thorough preparation.

Preparation is usually the key to proper long lasting paint applications. If the surfaces to be painted have not had paint applied previously, then the process is somewhat easier. If a previous coat exists, then its removal is usually required, and this in itself is a skill that needs an expert touch.

Surfaces can be prepared by using ultra high pressure water jets, or water jetting as it is also known. This has both a washing and a blasting effect, which can remove grit and dust as well as any other loose particles. Water jetting leaves a surface cleaner than any of the other methods of preparation. It can be used in all weathers and it has no adverse environmental effects.

Abrasive preparation is also used by industrial painting contractors. This can be dry, wet, or a combination of wet and dry. In this way rust, grit, dust and chemicals can easily be removed to leave a virgin surface ready for the paint application. When sufficient care and attention is taken over the preparation process, the painting process is made easier with a greater likelihood of a successful outcome.

In industrial painting, applying the paint with a brush or roller is not the only option. Powder coating, for example, is a process where particles of dry paint have an electrostatic charge applied before being positioned on a grounded surface. The particles are held on the surface by electrostatic attraction. Heat is then applied, which allows the powder coating to flow together and be cured in place.

For powder coating to work it is of course necessary for the surface being treated to be electrically conductive. Originally this meant only metal surfaces. However, recent technological advanced have meant that other surfaces, including such unlikely ones as plastic and wood, can now also be treated in this way.

Coil coating, also known as roll coating, is a high speed method of applying a coating of paint to a metal surface. It is a continuous process, which is why it is a fast method. It is also the most cost-effective and energy-efficient method of getting paint on to a metal surface, as well as being extremely kind to the environment.

Spray coating is a more common way to apply paints on to a surface, and as such it is extensively used by industrial painting contractors. This method can also deliver resins and sealants effectively under pressure. The inherent messiness associated with this kind of delivery through overspray can be greatly minimised by applying an electrostatic charge to the spray.

Industrial painting contractors have to keep on top of all the latest developments. They need to be versatile and flexible, being able to offer a wide range of preparation processes, as well as a wide range of coating techniques and methods.

Source by Caron J Rose

Pros and Cons of Using Spray Paint

For all you DIY home renovators sick of using paint rollers and brushes, spray paint can be a panacea for all your problems. Instead of using labor intensive techniques that put tremendous pressure on your back and still don’t give you that perfect finish, you can resort to paint sprayers that provide a nice, even coat of paint provided you do it right.

Positive Aspects of Spray Painting

Paint brushes are great for small areas which require intensive coats of paint. But if you want to cover wide swaths of area with minimum effort, a spray paint is best for the job. Spray painting also has the added benefit that it can override some surface imperfections like gaps, cracks, bumps etc that paint brushes and rollers have problems with.

Using a spray paint also allows for an even coat. However, you do need to be mindful of overlapping but it is of less concerning factor here than with paint rollers.

The operator has greater control over the process and can get the job done and over with quickly and easily. It also helps in the control of material and labor cost of the overall project.

Custom Paint

One way to make spray painting interesting is by using a custom paint. As the name suggests, a custom paint is a unique paint that is distinct from anyone else’s paint. Using a custom paint is a way of expressing one’s individual personality. In fact, the more you look at it, the more it reveals. It adds a new depth and dimension to the paint. There are literally millions of options to choose from and the choice is limited only by your imagination.

Things You Need to Consider

Many home renovators simply assume that spray painting can be used for any project. This is not the case. It is ideal for smooth surfaces where other options like brushes and rollers leave an unsatisfactory effect. It gives excellent results when used for external painting jobs especially for garage doors, external metal doors, frames, metal equipment etc.

There is a lot of preparation work that goes in before using the Spray paint. Everything that is not to be painted has to covered with masking tape, tarp etc. You need to make sure that all furniture, windows and floors are properly protected. There is no leeway here and no margin for error.

It is not very wise to use spray painting for a small job. You may end up spending more time doing the preparation and cleaning up afterward than the actual painting work.

Conventional spray painting systems are accompanied by overspray. A very fine spray can spread to furniture and humans which is not very good from a health point of view.

Any final decision regarding spray paint and custom paint should be arrived at only after thoughtful consideration of the above factors. Proper operational techniques will give you the best results.

Source by Jason Bronce

Is Running A Painting Business Seasonal?

I was just eavesdropping in on someone’s conversation this morning who just started their own painting business but complains that it is a bit slow. Someone else remarked saying that “they didn’t want to burst their bubble but painting is seasonal”.

Well, I WOULD like to burst that guy’s bubble and say, “No, painting is not seasonal. Only the type of painting you do can be classified as seasonal”. Yes, EXTERIOR painting is seasonal from spring until fall unless of course you live in a warmer climate.

But other types of painting like faux painting, mural painting, interior painting for residential, commercial and industrial are year round markets you can stay busy in.

As a matter of fact, when I first started my painting business, it was in the early fall. I found residential work all the way through the winter – even the toughest part, the time between Thanksgiving and Christmas. Not too bad I guess for my first year starting out.

Look at it this way, if running a painting business was seasonal then all painting companies (big, medium-size and smaller ones) would only be able to work half the year. Paint stores might as well shut down for the winter as well. Even window washing isn’t seasonal no matter how cold it gets.

If you don’t want to do interior painting and just want to be an exterior house painter then yeah, it’s seasonal. You just need to find a winter service like snow plowing or something. But if you want work all year long there is plenty of it.

If you are serious about operating a successful, painting business that stays busy year round, you are going to need to know how to run the business end of it successfully as well as the painting end. Having a business partner for this could be an advantage for you.

Two important secrets to running a successful painting business are advertising and doing accurate estimates. Get these two things right and the rest of it pretty much falls in place.

Some companies focus more on doing commercial and industrial painting and some specialize more in the residential and smaller commercial painting markets.

Once you decide if you are going to want or need a reliable business partner, employees and which painting markets you want to capture, you can then focus on your marketing better.

I read about one large painting contractor in the Chicago area that decided to focus on the commercial and industrial painting markets. He found out quickly that these two markets have deep pockets.

Of course with this type of painting you will have to buy some serious painting equipment. And you will need an experienced crew that is used to commercial and industrial painting.

Is this type of painting seasonal? They might slow a down a bit during the winter but then again there is plenty of large interior projects all year round. If anything were seasonable about the painting trade it would only be because of exterior painting in colder climates, not staying busy or the money.

Source by Lee Cusano

Drop Coating Metallic Auto Body Paint

Drop coating is an important skill that every auto body paint sprayer should aspire to master. Drop coats are administered during the last phase of the spraying process when metallic paints are used. When applied to an auto body panel correctly, drop coats offer full color coverage, perfect metallic content distribution and a better paint base that can accept lacquers with ease.

Applying Metallic Paint

Drop coating should be used with all metallic auto paints. Many paint sprayers apply metallic base coats using the same methods with which they apply solid colors, and this is a common error that compromises an otherwise perfect job. While horizontal arm movements are perfect for most solid color spray jobs, metallic auto body paint should be dropped onto the panel as soon as basic coverage has been achieved, and it is equally as important to cross coat the final application in horizontal and vertical directions.

Ensuring Uniform Paint Coverage

Before drop coats can be applied, the prepared car panel must be adequately covered with metallic auto body paint to help avoid primer transparency. Once the color is activated, a full wet coat of paint should be sprayed to the surface of the panel. It is essential that each horizontal spraying movement blends into the previous one to guarantee uniform coverage and distribution (overlaps of 30% to 40% are perfect). As soon as a single we coat has been applied, the auto body paint must be left to dry for around 10 minutes. Never spray a second coat until the first one has achieved a matte appearance.

Applying a Second Coat of Metallic Paint

Personally, I like to spray the next coat of paint in a different direction to the first, especially when the panel has been taken off the car. Sometimes, this isn’t possible on vertical panels, such as fenders and doors, if they are still fitted to the vehicle so don’t be too concerned if you are happier using a typical horizontal spraying pattern. The second application must be sprayed in a similar manner to the first coat, but try to achieve 80% wetness in comparison to the earlier application. Once more, the auto body paint must be left to dry for around 10 minutes until matte.

Applying the Drop Coat

If the metallic paint is still transparent, an additional coat may be required but this won’t be necessary in most cases. To spray the actual drop coat, position the spray gun 18 to 24 inches away from the surface of the panel and reduce gun pressure by 20% to 30%. Spray the auto body paint horizontally, moving the arm slowly across the panel so the metallic color drops (or falls) onto the surface. Maintain uniform coverage until the spraying process is complete. Recoat the panel from a similar distance straight away, but swap the horizontal movements for a vertical direction so the subsequent coat crosses the first. As well as guaranteeing even paint coverage, crossing the drop coat offers uniform metal distribution and a superior surface that will accept lacquer correctly.

Tacking the Drop Coat

Allow the drop coat to dry before visually inspecting the metallic auto body paint. Check for patches where coverage might be inconsistent and spray a further drop coat if necessary. With solvent-based auto body paint, it is always a good idea to run a tack rag over the vehicle panel as soon as the drop coat has dried. Specialist tack rags can be purchased for water-based auto body paint, but it is preferable to waive the tacking process as high paint build-up can peel back the color and this can lead to frustrating rework.

Source by Paul J. Mitchell